Porter-Cable LS3100 Instruction Manual

InstructionmanualThe Model and Serial No. plate is located on the mainhousing of the tool. Record these numbers in thespaces below and retain for futu

10SquareNOTE: OTHER BEAMS HAVE BEEN OMITTED FROM ILLUSTRATION FOR CLARITY.Squaring1. Position laser square in the corner of the two surfaces to be squ

119. Recalibration procedureAll laser squares are calibrated when processed through the Porter-Cable qualitycontrol program. This process assures that

1213. Turn the laser square on and check the position of the beam to see if it isat a height exactly halfway between the first and second markings mad

13Accuracy:+/- 1/4" @ 100’Range (laser visibility):Up to 100’Leveling mode:Self-levelingLeveling range forward to backward: +/- 6 degreesside to

GENERAL MAINTENANCE KEEP TOOL CLEANAll plastic parts should be cleaned with a soft damp cloth. NEVER use solventsto clean plastic parts. They could ve

15ABCDEFGBATTERY The batteries will discharge if stored for long periods of time, and may requirereplacement before use.SERVICE AND REPAIRSAll quality

16PORTER-CABLE LIMITEDONE YEAR WARRANTYPorter-Cable warrants its Professional Power Tools for a period of one year from the date of originalpurchase.

The following are trademarks of PORTER-CABLE •DELTA (Las siguientes son marcas registradas de PORTER-CABLE •DELTA S.A.) (Lesmarques suivantes sont des

2GENERAL SAFETY RULES ELECTRICAL SAFETY1. Use battery operated laser square with alkaline batteries only. Use ofany other batteries may permanently da

3FUNCTIONAL DESCRIPTION FOREWORDPorter-Cable Model LS3100 Laser Square is atime-saving 3 beam precisionlaser square of superior quality and is easy to

4OPERATION3. Mounting accessory featuresIntroductionCongratulations! You’ve just purchased a time-saving, precision laser tool ofsuperior quality. Las

5Turning the laser square on and off• To turn laser square on, slide the power switch to the up position.Note: This not only turns the laser on, but a

6Sliding mounting stud• Mount laser square to the accessory using the sliding mounting stud. • Use the sliding/rotating action of the sliding mounting

7Laser Square contains optics which have been designed to project a cross-hairpattern on to any surface. This pattern is intended to help the user fin

8PlumbNOTE: OTHER BEAMS HAVE BEEN OMITTED FROM ILLUSTRATION FOR CLARITY.Plumbing a surface1. Position laser square close to the surface to be plumbed.

9LevelNOTE: OTHER BEAMS HAVE BEEN OMITTED FROM ILLUSTRATION FOR CLARITY.Leveling1. Adjust the height of laser square using the mounting accessory or