Porter-Cable CPLDC2540S User Manual download pdf (Page 16)

16- ENG

A02250

5. Drain water from air tank by opening drain valve (counter-clockwise) on

bottom of tank. NOTE: Tilt tank forward to drain tank completely.

Water will condense in the air tank. If not drained, water will

corrode and weaken the air tank causing a risk of air tank

rupture.

6. After the water has been drained, close the drain valve (clockwise). The air

compressor can now be stored.

NOTE: If drain valve is plugged, release all air pressure. The valve can then be

removed, cleaned, then reinstalled.

Oil

Drain tank to release air pressure before removing the

dipstick or oil drain plug.

Compressor head and cylinder sleeve are very hot. Do not

touch.

Checking

1. Set the On/Auto/Off lever to “OFF”.

2. Remove dipstick (A) and check oil on dipstick for visual signs of

contaminants (water, dirt, etc).

Make sure air vent (C)

in dipstick is free from

debris. If air vent is blocked pressure

can build in crankcase causing damage

to air compressor and possible personal

injury.

3. Wipe oil from dipstick.

4. Replace dipstick and allow oil to

collect on dipstick.

5. Remove dipstick and check oil level

on dipstick, + mark indicates full and

the - mark indicates add oil. If oil level

is below - mark, slowly add oil until it

reaches the + (full) mark on the dipstick.

NOTE: Use a air compressor oil such as SAE-30 (API CG/CD heavy duty motor

oil. Under extreme winter conditions use SAE-10 weight oil.

6. Replace dipstick (A).

Changing

1. Set the On/Auto/Off lever to “OFF”.

2. Remove the dipstick (A).

3. Remove the oil drain plug (B) and drain oil into a suitable container.

4. Replace the oil drain plug (B).

(+)Full

(-)Add

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Porter-Cable CPLDC2540S User Manual Page 16

Comments to this Manuals

Related products and manuals for Air compressors Porter-Cable CPLDC2540S