Porter-Cable CPLDC2540S User Manual download pdf (Page 20)

20- ENG

A02250

TROUBLESHOOTING

Performing repairs may expose voltage sources, moving

parts or compressed air sources, moving parts or

compressed air sources. Personal injury may occur. Prior to attempting

any repairs, unplug the air compressor and bleed off all air tank air

pressure.

PROBLEM

CAUSE

CORRECTION

Pressure switch does not

shut off motor when

compressor reaches “cut-

out” pressure.

Pressure switch “cut-out”

too high.

Move On/Auto/Off lever to

the “OFF” position, if the

outfit does

not shut off contact a

Trained Service Technician.

Contact a Trained Service

Technician.

Excessive tank

pressure -

safety valve

pops off.

Tube fittings are not tight

enough.

Tighten fittings where air can

be heard escaping. Check

fittings with soapy water

solution. DO NOT

OVERTIGHTEN.

Air leaks at

fittings.

Air leaks at

pressure switch

release valve.

(if equipped)

Defective pressure switch

release valve.

Contact a Trained Service

Technician.

Air leaks in air

tank or at air

tank welds.

Defective air tank.

Air tank must be replaced.

Do not repair the leak.

Do not

drill into,

weld or otherwise modify

air tank or it will weaken.

The tank can rupture or

explode.

Air leaks

between head

and valve plate.

Leaking seal.

Contact a Trained Service

Technician.

Air leaks at or

inside check

valve

Check valve seat damaged.

A defective check valve

results in a constant air leak

at the pressure release valve

when there is pressure in the

tank and the compressor is

shut off. Replace check

valve. Refer the “To Replace

or Clean Check Valve” in the

“Service and Adjustment”

section.

1 2 ... 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Porter-Cable CPLDC2540S User Manual Page 20

Comments to this Manuals

Related products and manuals for Air compressors Porter-Cable CPLDC2540S